This site will look much better in a browser that supports web standards, but it is accessible to any browser or Internet device.
Clubs, glossaries, museums, shops and much more......
...all of your model making needs from one site.
Using a V-block to clamp the piston of my rotary engine to drill the gudgeon pin hole. As there were 5 pistons to drill exactly the same I set up the V-block and clamped it to the milling table.
The V-block clamp is quite large and would have hit the chuck so I used another piece of bar-stock and a piece of brass angle to apply the clamping force, thus allowing the clamp to be moved away from the line of the chuck.
Price: approx £20